Menu

Informacje prawne

General Terms and Conditions

for Entrepreneurs pursuant to § 14 BGB (German Civil Code) – As of: October 2026

§ 1 Scope of Application

1.1 These General Terms and Conditions (hereinafter "GTC") apply exclusively to business relationships between Art of Coins GmbH, Saffeweg 23, 38304 Wolfenbüttel, Germany (hereinafter "Provider") and entrepreneurs within the meaning of § 14 BGB, legal entities under public law, or special funds under public law (hereinafter "Customer").

1.2 Consumer transactions are expressly excluded. The Provider concludes contracts exclusively with commercial enterprises and businesses.

1.3 The version of these GTC valid at the time of contract conclusion shall apply.

1.4 Deviating, conflicting, or supplementary general terms and conditions of the Customer shall only become part of the contract if the Provider has expressly agreed to their validity in writing. This consent requirement applies in all cases.

§ 2 Conclusion of Contract

2.1 The presentation of the Provider's products and services does not constitute a legally binding offer but rather a non-binding invitation to order. The Provider's offers are subject to change.

2.2 A contract is only concluded upon written order confirmation by the Provider or upon execution of delivery.

2.3 The Provider's offers regarding prices and conditions are valid for a period of 30 days from the offer date, unless expressly stated otherwise.

§ 3 Description of Services

3.1 The Provider offers services in the following areas:

  • Coin minting and medal production
  • Design development and graphic design
  • License management and licensing services
  • Fulfillment and logistics services
  • Packaging and assembly

3.2 The exact description of services results from the respective offer or order confirmation. Verbal side agreements require written confirmation.

§ 4 Design and Product Development

4.1 Scope of Services

In the area of product development, the Provider's range of services includes:

  • Creation of drafts and designs according to customer specifications
  • Technical consulting on the feasibility of coin and medal projects
  • Sample production and prototyping
  • Adaptation and revision of customer designs

4.2 Exclusion of Legal Advice

The Provider does not provide legal advice. This applies in particular to:

  • Copyright issues
  • Trademark and intellectual property law
  • Licensing obligations and requirements
  • Personality rights (e.g., right to one's own image)
  • Competition law aspects
  • Customs and tax matters

4.3 Copyright Review and Approval

The Customer bears sole responsibility for:

  • Reviewing all copyrights, trademarks, and other protective rights related to the motifs, texts, and design elements used
  • Obtaining all necessary licenses, permits, and usage rights
  • The legality of the templates, images, and motifs provided
  • Compliance with all applicable laws and regulations

Final approval for production is given exclusively by the Customer. By granting production approval, the Customer bindingly confirms that all necessary rights are in place and that no third-party rights are infringed.

4.4 External Legal Advice

Upon the express request of the Customer, copyright, trademark, or other legal reviews may be commissioned for a separate fee. These are carried out by specialized attorneys commissioned by the Provider.

Such a commission requires an explicit written agreement and is not part of the standard design services.

4.5 Indemnification

The Customer shall indemnify the Provider against all third-party claims arising from the infringement of copyrights, trademarks, personality rights, or other protective rights in connection with content approved or provided by the Customer. This also includes reimbursement of legal defense costs incurred by the Provider.

§ 5 Intellectual Property and Usage Rights

5.1 All drafts, designs, graphics, and other work results created by the Provider remain the intellectual property of the Provider until full payment.

5.2 The transfer of usage rights to the Customer only takes place after full payment of the agreed remuneration.

5.3 The scope of the granted usage rights (simple/exclusive, limited or unlimited in time/territory) results from the individual agreement.

5.4 Non-commissioned drafts and rejected design proposals may not be used by the Customer.

§ 6 Prices and Payment

6.1 All stated prices are net prices plus the applicable statutory value-added tax.

6.2 Unless otherwise agreed, payments are due within 7 days of invoicing without deduction.

6.3 The Provider is entitled to require advance payment or security from new customers or in case of justified doubts about the Customer's ability to pay.

6.4 In case of payment default, the Provider is entitled to charge default interest at a rate of 9 percentage points above the respective base interest rate. The assertion of further damages caused by default remains reserved.

6.5 Set-off against counterclaims by the Customer is only permissible if these are undisputed or have been legally established.

6.6 Precious metal prices: For products made of precious metals, in particular gold and silver, the metal component of the price is based on the daily price of the respective precious metal on the date of the order confirmation, unless a fixed price has been expressly agreed. Quotations are binding with regard to the metal component only within the validity period stated therein.

6.7 If the relevant precious metal price changes by more than 5 % between the quotation or order confirmation and delivery, the Provider is entitled to adjust the metal component of the price in line with the daily price on the date of dispatch. If the price falls to this extent, the price will be adjusted accordingly in the Customer's favour. This does not apply where a fixed price has been expressly agreed.

6.8 If a price increase under paragraph 6.7 exceeds 10 % of the agreed total price in aggregate, the Customer is entitled to withdraw from the contract within 7 days of notification of the price adjustment. The Customer shall reimburse any costs already incurred for customer-specific services, in particular design, dies and tooling.

6.9 The Customer is entitled to a right of retention only insofar as its counterclaim arises from the same contractual relationship and is undisputed or has been legally established.

§ 7 Prices, Shipping, Packing and Handling Charges

7.1 Unless expressly agreed otherwise, all product prices are net prices in euros and are exclusive of any applicable statutory value-added tax. Product prices do not include transportation, freight, transport insurance, shipping packaging or preparation for dispatch.

7.2 Where the goods are shipped at the customer's request, the customer shall bear the transportation costs. These include, in particular, the freight charged by the parcel service, carrier or freight forwarder and any transport-related surcharges, including charges for valuables transport, insurance, tolls, fuel, express delivery, island delivery, oversized shipments or special delivery requirements. Where these costs are known when the contract is concluded, they will be stated in the quotation or order confirmation. Otherwise, they will be charged according to the costs actually incurred for the respective shipment.

7.3 In addition to the transportation costs, Art of Coins will charge the following flat-rate packing, dispatch preparation and handling fees: a) EUR 150.00 net for each pallet prepared for dispatch; or b) EUR 20.00 net for each wholesale parcel prepared for dispatch.

7.4 A "pallet" means each pallet assembled and secured as a separate load unit for transportation. A "wholesale parcel" means each separate, non-palletised package or shipping carton handed over to a parcel service, carrier or freight forwarder. The type and number of load or packaging units actually required for dispatch shall be decisive. Cartons forming part of a palletised load will not additionally be treated as wholesale parcels under this provision.

7.5 The flat-rate fees under paragraph 7.3 cover the provision of the usual pallet or standard shipping packaging, the necessary packing and securing materials, the labour required for packing and preparation for dispatch, the preparation of customary shipping documents and the usual coordination and communication with the customer, parcel service, carrier or freight forwarder. Product packaging, including capsules, cases, boxes, blister packs, certificates or retail packaging, is not included and will be charged in accordance with the terms agreed for the respective product.

7.6 The flat-rate fees also apply where the customer arranges the transportation itself or has the goods collected by a carrier or freight forwarder appointed by the customer, provided that Art of Coins packs or otherwise prepares the goods for transportation. No fee under paragraph 7.3 will be charged for an unpacked customer collection where no preparation for dispatch by Art of Coins is required.

7.7 Special packaging, individual labelling, special documentation, export or customs clearance, and any other services requested by the customer that exceed the customary preparation for dispatch will only be provided by prior agreement and will be charged separately based on the work and costs involved.

7.8 Where partial or subsequent deliveries are requested or caused by the customer, the transportation costs and the applicable fee under paragraph 7.3 will be charged for each separately prepared shipment. Where Art of Coins divides a delivery for its own operational reasons without a corresponding agreement with the customer, the total handling fees charged to the customer shall not exceed the amount that would have applied to a consolidated delivery; the same applies to any resulting additional transportation costs.

7.9 Customs duties, import VAT, import charges, fees imposed by foreign authorities and any other costs incurred in the country of destination in connection with cross-border deliveries shall be borne by the customer unless expressly agreed otherwise in writing.

7.10 The Provider is registered in the LUCID packaging register of the Zentrale Stelle Verpackungsregister and complies with its obligations under the German Packaging Act (VerpackG). Transport packaging not arising at private end consumers will be taken back by the Provider in accordance with § 15 VerpackG. The Customer shall return such packaging carriage paid to the Provider's registered office at the Customer's expense.

§ 8 Sample and Pre-Series Approval, Changes and Cancellation

8.1 Designs, artwork, samples, trial strikes and pre-series pieces will be submitted to the Customer for approval before series production begins, where agreed or customary in the industry. The Customer shall check them carefully, in particular for content, spelling, motif, dimensions and finish.

8.2 Upon approval by the Customer, the approved documents and samples constitute the binding basis for production. The Provider is not liable for errors that the Customer could have detected at the time of approval.

8.3 Changes requested by the Customer after approval or after placing the order require the Provider's consent. Any resulting additional costs, in particular for design adjustments, new or modified dies and tooling and material already used, will be charged based on the work and costs involved. Agreed delivery dates will be postponed accordingly.

8.4 Custom strikes and other products manufactured to the Customer's specifications cannot be cancelled after the order confirmation. If the Customer nevertheless terminates or cancels the order, it shall reimburse the Provider for all costs incurred up to that point, in particular for design, dies and tooling, procured material and pieces already produced, but at least the agreed tooling costs. Further statutory claims of the Provider remain unaffected.

§ 9 Delivery

9.1 Delivery dates and deadlines are only binding if they have been expressly designated as binding by the Provider.

9.2 Partial deliveries are permitted insofar as reasonable for the Customer.

9.3 In case of shipment, the risk of accidental loss and accidental deterioration of the goods passes to the Customer upon handover to the forwarding agent, carrier, or other third party designated to carry out the shipment.

9.4 The Provider reserves the right to withhold performance in whole or in part in case of supply chain disruptions, force majeure, or unavailability of preliminary materials (reservation of self-delivery).

9.5 Production-related over- or under-deliveries of up to 10 % of the ordered mintage are permitted. The quantity actually delivered will be invoiced.

9.6 Customary industry manufacturing tolerances apply to weight, diameter and thickness. Minor deviations in colour, toning, patina, surface finish and relief resulting from the material or manufacturing process do not constitute a defect. Samples, images and digital visualisations are approximations and do not constitute a guarantee of quality.

§ 10 Retention of Title

10.1 The delivered goods remain the property of the Provider until full payment of all claims arising from the business relationship (extended retention of title).

10.2 The Customer is entitled to resell the reserved goods in the ordinary course of business. The Customer hereby assigns all claims arising from the resale to the Provider. The Provider accepts this assignment.

10.3 In case of processing or transformation of the reserved goods by the Customer, the Provider acquires co-ownership of the new item in proportion to the value of the reserved goods to the value of the new item.

10.4 The Customer is obliged to notify the Provider immediately if third parties access the reserved goods, particularly in the case of seizures or insolvency applications.

§ 11 Dies and Tooling

11.1 Dies, matrices, minting tools and other production equipment remain the property of the Provider, even if tooling costs are charged to the Customer in whole or in part. There is no claim to their surrender.

11.2 The Provider uses dies and tooling made for the Customer exclusively for that Customer's orders, unless otherwise agreed.

11.3 The Provider retains dies and tooling for a period of 2 years after the last delivery. After this period, the Provider is entitled to destroy them without further notice. Longer retention requires a separate written agreement and may be charged separately.

§ 12 Warranty

12.1 The warranty period is one year from delivery.

12.2 The Customer is obliged to inspect the goods immediately upon receipt for defects and to give written notice of recognizable defects within 7 working days (§ 377 HGB - German Commercial Code). Hidden defects must be reported immediately upon discovery.

12.3 In case of justified defect notifications, the Provider has the right to choose between repair and replacement delivery.

12.4 There is no claim for reimbursement of installation and removal costs, insofar as this is legally permissible.

§ 13 Liability

13.1 The Provider is liable without limitation for intent and gross negligence.

13.2 For slight negligence, the Provider is only liable in case of breach of material contractual obligations (cardinal obligations). In this case, liability is limited to the foreseeable, contract-typical damage.

13.3 Liability per damage event is limited to the respective order value or EUR 50,000, whichever is higher.

13.4 The above limitations of liability do not apply to damages resulting from injury to life, body, or health, or to claims under the Product Liability Act.

13.5 The Provider is not liable for legal infringements (in particular copyright, trademark, or personality right infringements) in connection with content approved or provided by the Customer.

§ 14 Confidentiality

14.1 Both contracting parties undertake to keep confidential all confidential information obtained in the course of the business relationship.

14.2 Confidential information includes in particular trade secrets, price calculations, conditions, technical specifications, and customer data.

14.3 The confidentiality obligation does not apply insofar as disclosure is required by law or the information is already publicly known.

§ 15 Force Majeure

15.1 Force majeure includes events beyond the control of the contracting parties, in particular pandemics, war, natural disasters, governmental measures, strikes, lockouts, and severe supply chain disruptions.

15.2 Upon the occurrence of a force majeure event, the performance obligations of the affected party are suspended for the duration of the impairment.

15.3 If the impairment lasts longer than three months, both parties are entitled to withdraw from the contract.

§ 16 Export Control, Sanctions and Anti-Money Laundering

16.1 When passing on or exporting the delivered goods, the Customer undertakes to comply with all applicable foreign trade, export control and sanctions regulations of the European Union, the Federal Republic of Germany and, where applicable, the United States of America.

16.2 The Provider is entitled to request information and declarations from the Customer regarding the final destination and end use of the goods. If there are indications of a breach of such regulations, or if the Customer or any party involved is listed on a sanctions list, the Provider is entitled to refuse delivery or to withdraw from the contract. In this case, claims for damages by the Customer are excluded.

16.3 When trading in precious metals, the Provider is subject to the obligations of the German Anti-Money Laundering Act (GwG). The Provider is obliged to identify the Customer and, where applicable, the beneficial owner, and may request suitable evidence for this purpose, in particular commercial register extracts, identity documents and information on the source of funds.

16.4 If the information or evidence required under paragraph 16.3 is not provided or is incomplete, the Provider is entitled not to enter into the business relationship, to refuse delivery or to withdraw from the contract. Cash payments are only accepted within the legally permissible limits.

§ 17 Final Provisions

17.1 The law of the Federal Republic of Germany applies, excluding the UN Convention on Contracts for the International Sale of Goods (CISG).

17.2 The place of performance for all obligations arising from the contractual relationship is Wolfenbüttel, unless otherwise agreed.

17.3 The place of jurisdiction for all disputes arising from the contractual relationship is, insofar as legally permissible, Wolfenbüttel.

17.4 Should individual provisions of these GTC be or become invalid, the validity of the remaining provisions shall remain unaffected. The invalid provision shall be replaced by a valid one that comes closest to the economic purpose.

17.5 Amendments and additions to these GTC require written form. This also applies to the waiver of this written form requirement.

Notice: These GTC apply exclusively to business customers (B2B). For questions about our terms and conditions, please contact us at info@art-of-coins.de.

Zapytanie ofertowe

Zapraszamy do złożenia niezobowiązującego zapytania B2B. Odpowiemy e-mailem.

Jak działa zapytanie ofertowe

Ustawienia plików cookie

Ustawienia plików cookie

Używamy plików cookie, aby zapewnić Państwu możliwie najlepsze korzystanie z naszej strony. Mogą Państwo sami zdecydować, na które kategorie plików cookie wyrażają Państwo zgodę.